Washing machines are essential appliances that make our lives easier. However, when they stop working and display error codes, it can be frustrating. Each error code provides vital information about the specific problem your washing machine is facing. In this guide, SAGA Appliance Repair in Ottawa will help you understand common washing machine error codes, what they mean, and how to fix them.

Common Washing Machine Error Codes

1. LF (Long Fill) Error

Description: This error indicates that the washing machine is taking too long to fill with water.

Solution:

• Ensure the water supply is fully open.
• Inspect the water inlet hoses for any kinks or clogs.
• Clean the water inlet filters.
• Check the water pressure in your home.
• If the water inlet valves are faulty, they may need to be replaced.

2. LE (Load Error)

Description: This code often indicates an issue with the motor due to overloading the machine.

Solution:

• Turn off the washing machine and remove some clothes to lighten the load.
• Restart the cycle.
• If the error persists, the motor or control board may be malfunctioning and require a professional technician to inspect the motor.

3. OE (Drain Error)

Description: The washing machine is unable to drain properly, usually due to a clog or issue with the drain pump.

Solution:

• Check if the drain hose is kinked, clogged, or improperly installed.
• Clean out the pump filter to remove any blockages.
• Inspect the drain pump for any debris or signs of malfunction.

4. UE (Unbalanced Load Error)

Description: This code appears when the washer detects an unbalanced load.

Solution:

• Pause the washing machine and redistribute the load inside the drum to make it more even.
• Avoid washing single heavy items like blankets. Instead, add a few towels to balance the weight.
• If the error keeps recurring, check if the suspension rods or springs inside the washer are worn out.

5. dE (Door Error)

Description: This error code signals that the washing machine door is not closed properly or the door latch is malfunctioning.

Solution:

• Make sure the door is firmly closed.
• Inspect the door latch for any signs of wear or damage.
• If the latch or door lock assembly is faulty, it may need to be replaced.

6. F5 (Water Temperature Error)

Description: The F5 code indicates that the washing machine is detecting an inappropriate water temperature for the selected cycle.

Solution:

• Verify that the hoses are connected correctly: hot to hot and cold to cold.
• Check the water heater in your home if the water temperature seems incorrect.
• If the error persists, the temperature sensor may need replacement, and a technician from SAGA Appliance Repair can assist.

7. F21 (Long Drain Time)

Description: This code appears when the washer takes too long to drain.

Solution:

• Clean the drain filter and check for blockages in the drain hose.
• Inspect the drain pump for clogs or mechanical failure.
• Ensure that the drain hose is properly installed and not too high above the machine.

8. E1 (Water Inlet Error)

Description: The washing machine is having trouble with water flow due to a supply or inlet valve issue.

Solution:

• Ensure the water faucets are turned on fully.
• Inspect the water inlet hoses for blockages or kinks.
• Clean the water inlet filters.
• Test the water inlet valve for continuity using a multimeter.

9. F9 E1 (Drain Pump System Error)

Description: The F9 E1 error code means that the washer is having trouble draining water within the expected time.

Solution:

• Check for obstructions in the drain pump or hose.
• Clean out any debris from the pump filter.
• If the pump is not functioning correctly, it may need replacement.

10. F6 E2 (Motor Control Error)

Description: This error indicates a communication failure between the main control board and the motor control board.

Solution:

• Turn off the washing machine and unplug it for several minutes to reset the control boards.
• If the issue persists, the motor control board or the wiring harness may need inspection or replacement by a technician.

11. E2 (Water Overflow Error)

Description: This code is triggered when the washer detects excessive water in the drum.

Solution:

• Turn off the water supply and restart the washer.
• Inspect the water inlet valve for malfunctions that may cause continuous water flow.
• A faulty pressure sensor may also cause this issue and will need professional repair.

12. ND (No Drain Error)

Description: The ND code signifies that the washing machine is unable to drain water from the drum.

Solution:

• Check for any clogs in the drain hose or pump.
• Clean the drain filter to remove any lint or debris.
• Inspect the drain pump for damage or blockages.

13. SUD (Excessive Suds Error)

Description: This error appears when the washing machine detects too many suds in the drum.

Solution:

• Use the correct type and amount of detergent (HE detergent is recommended for high-efficiency washers).
• Run the washing machine on a “rinse and spin” cycle to clear the excess suds.
• If the issue persists, there may be an issue with the detergent dispenser or the washer’s control system.

14. F8 E1 (Water Supply Error)

Description: The washer is not getting enough water due to a supply issue.

Solution:

• Ensure that the water faucets are fully open.
• Check the water inlet hoses and filters for blockages or damage.
• If the water inlet valves are faulty, they may need replacement.

15. tE (Temperature Sensor Error)

Description: This error indicates a malfunction in the temperature sensor or thermistor.

Solution:

• Ensure that the hot and cold water hoses are connected properly.
• Test the temperature sensor with a multimeter to check for continuity.
• Replace the temperature sensor if it is faulty.

When to Call a Professional Appliance Repair Service

While many of these error codes can be resolved with simple DIY solutions, some issues require the expertise of a professional. If you encounter any of the following situations, it’s time to call SAGA Appliance Repair in Ottawa:

• The error code keeps recurring despite your troubleshooting efforts.
• There is a significant mechanical or electrical problem that requires specialized tools or expertise.
• You need to replace parts such as water inlet valves, motors, or control boards.
• You are uncomfortable working with electrical components, water systems, or disassembling the washer.

Our experienced technicians at SAGA Appliance Repair are equipped to handle a wide variety of washing machine problems. We provide prompt, affordable service to get your washing machine running smoothly again.

Why Choose SAGA Appliance Repair in Ottawa?

At SAGA Appliance Repair, we offer:

• Expert Diagnosis: Our technicians are trained to diagnose and fix washing machine problems quickly and accurately.
• Fast Service: We know how inconvenient it is to be without a working washing machine. That’s why we offer same-day service for urgent repairs.
• Affordable Pricing: We provide upfront pricing with no hidden fees, so you know what to expect.
• Wide Range of Services: From small part replacements to major repairs, we’ve got you covered.

For more information or to schedule a repair, contact SAGA Appliance Repair in Ottawa today. Let us help you keep your washing machine in top condition!

This post covers common washing machine error codes, helping users understand and troubleshoot them while highlighting when it’s best to call a professional service like SAGA Appliance Repair in Ottawa.